|
Rear of Monitor
(Monitor Connections)
|
 |
|
Rear of VCR
(VCR Connections)
|
|
 |
|
Front of Monitor
|
 |
|
Connect Standard VHS VCR to a B&W and/or Color Quad Video Observation System Monitor Using our KO-750 VCR Cable
To connect a standard VHS VCR to a B&W monitor using the KO-750 cable:
- Use only the KO-750 VCR cable with RJ-11-E plug on one end and four colored RCA plugs on the other.
- Match up the labels on the colored RCA plugs to the corresponding jacks on the VCR.
- Look closely - the colored RCA plugs are stamped video out-red, video in-red, audio out-white, and audio in-white.
Your VCR's input must be set to "line" or "aux" or "video" depending on the make of the VCR. This is usually done by pressing the "input" or "TV/Video" button on the remote control or by entering "00" as the channel.
Tip: After completing all the hook-ups, press the "VCR" button on the monitor so the VCR indicator light comes on. If the VCR's input is not properly set, the camera picture will disappear. The camera picture will come back when the proper VCR input is selected. The camera's image must be visible on the monitor with the VCR indicator lit for the VCR to be able to record the camera's picture.
Other VCR Hook Up Options
|
